FERODO High Performance Clutch Friction Plate Set : FCD0127/1

FERODO High Performance Clutch Friction Plate Set : FCD0127/1

Marsoni

M251S

$39.94

Get it in 3 business days with 1 day shipping. Friday, May 29

FERODO High Performance Clutch Friction Plate Set : FCD0127/1FERODO High Performance Racing Clutch Plates are designed as a racing replacement item for the original fitment clutch plates. Contains 4 Hi Performance + 2 STD compound friction plates. Note: The two STD compound plates must be fitted one at each outer end of the clutch pack. The friction material of the FERODO Hi Performance Friction Plates do not contain any cork or rubber material reducing the problem of sticking or slippage. To enhance the

Easy Shipping

Quick Dispatch:

Your FERODO High Performance Clutch Friction Plate Set : FCD0127/1 orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your FERODO High Performance Clutch Friction Plate Set : FCD0127/1 ships.

Need Help?
Questions about FERODO High Performance Clutch Friction Plate Set : FCD0127/1, sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for FERODO High Performance Clutch Friction Plate Set : FCD0127/1 in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

For context, I’m a seasoned woodworker and always evaluate tools with the price in mind. This seemed like a good deal and in fact when it arrived, it looked and felt like reasonable quality for the price. Unhappily, the first bookshelf I drilled was off from side to side by almost 3 mm which would make a really wobbly shelf situation. It took a while to figure out what was happening, but I finally realized the metal bushings that guide the drill bit are so soft that they cored out from contact with the bit even though I was cautious to not put the bit in under power but to get it in the bushing and aligned before drilling. Still, the bushings started angling immediately. So when you then use those angled bushings to set the pin for the next series, it’s off by a little bit. Then the next is off by a little more…. By the time I drilled holes up and down a 6’ high shelf, the bushings were out of square, the holes were 3 mm out of alignment, and the shelf sides were firewood. Back to the drawing board and this goes in the trash, I’m afraid.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on May 3, 2026